When to Use a Sine Sweep or Random Vibration for Packaging

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #13659
    admin
    Keymaster

      Use a sweep to look for a strong response

      A sine sweep varies the excitation frequency across a chosen range, making it easier to spot a band where an insert or packed item responds strongly. Record the input level, sweep rate, direction and measurement points. A narrow peak can help target an investigation, but its frequency and size may change when the load or restraint changes.

      Use random vibration to represent a defined transport input

      A broadband random test excites a range of frequencies according to a power spectral density profile. Suppose a sweep reveals a peak at an inner tray. A random profile chosen for the intended shipment can then expose the packed carton to a broader input that includes that band. Compare the measured response and inspect the pack under the specified duration and load.

      Cosmetic packaging samples in the Sambound showroom

      Packaging sample showroom of SamBound New Material Technology Company Ltd. (sambound.com).

      Treat the two runs as answers to different questions. The sweep locates a response band in the setup tested. The random run evaluates behavior under the defined transport profile.

      sambound.com
      SamBound New Material Technology Company Ltd.

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.