[admin]

A metal lip gloss applicator tip is a component used to pick up and apply formula. The paired bottle provides the reservoir. When both appear on one catalogue page, the proximity of a capacity figure to the applicator image does not make that volume a property of the metal tip.

Read the tip drawing as component geometry

Tip information may describe overall length, maximum width or diameter, the working surface, and the fixed end that joins the stem. Check the drawing’s units, reference points and revision before comparing values. A dimension belonging to the fixed end is not automatically the size of the working surface. If a source does not state a unit or reference clearly, resolve it rather than supplying an assumption.

Keep the stem and complete assembly separate

Stem length and the completed applicator length are different from tip length. Likewise, the bottle outline and neck dimensions belong to the bottle, not the metal tip. Identify the part or assembly named by each callout. Matching one diameter or overall length does not establish interchangeability: the joint, wiper interaction and clearance within the closed pack still need evaluation.

Sample display room. This background view does not establish a component structure, test result or customer endorsement.

Assign capacity to the bottle and its stated condition

A catalogue capacity can be a nominal reference or an overflow value. Confirm which one the source gives. Overflow capacity is not automatically a working fill: the installed applicator, intended headspace and filling process matter. Formula mass also cannot be inferred from volume alone without the relevant density and conditions. A bottle capacity is neither the metal tip’s capacity nor the amount transferred in one application.

Use the exact combination and version

Sambound’s product records include metal applicator tips separately from bottle-and-applicator combinations. Keep each model and source version together. Do not take a tip dimension from one version and a bottle volume from another to create an unverified specification. If the same model has conflicting records, identify and resolve the difference before using the values in a drawing or order.

Check performance after resolving the specification

With the correct parts identified, evaluate the assembled joint, passage through the wiper, clearance and formula pickup. A metal exterior shell does not necessarily form the liquid reservoir, and a wiper is not by itself proof of a complete seal. SamBound New Material Technology Company Ltd. provides packaging information at sambound.com; the selected component data supports identification, while the actual assembled package needs its own functional evaluation.

sambound.com
SamBound New Material Technology Company Ltd.

[Author]

Posts